| Grade |
Insert
Material |
Coating |
Workpiece
Materials |
Description /
Application |
| SW400 |
CERAMIC |
SiC Whisker |
Steel |
High speed steel. High Chrome Steel in medium or low speed
cutting. Roughing and medium cutting with heavy interrupted. Excellent
flank and notch wear in high speed cutting. |
| SW800 |
CERAMIC |
SiC Whisker |
Steel |
Nickel Base alloy. Cobalt Base Alloy in high speed cutting.
Roughing and finishing with continuous or light interrupted. Excellent
flank and notch wear in high speed cutting. |
| ST100 |
CERAMIC |
Al2O3+TiC(N) |
Steel, Cast Iron |
Finishing for hardened steel and cast iron. Tougher alternative
to ST300. High thermal shock resistance. |
| ST300 |
CERAMIC |
Al2O3+TiC(N) |
Steel, Cast Iron |
General machining for hardened steel and cast iron. Excellent
wear resistance. |
| ST500 |
CERAMIC |
Al2O3+TiC(N) |
Steel, Cast Iron |
Fine finishing for hardened steel and cast iron. Alternative to
PCBN fine microstructure. |
| ST700 |
CERAMIC |
Al2O3+TiC(N) |
Steel, Cast Iron |
Fine finishing for hardened steel and cast iron in high
speed.Excellent wear and themal shock resistance. |
| TC100 |
CERAMIC |
TiN |
Steel, Cast Iron |
TiN coated on ST100 grade. Wear resistance improved. |
| TC300 |
CERAMIC |
TiN |
Steel, Cast Iron |
TiN coated on ST300 grade. Wear resistance improved. |
| SD200 |
CERAMIC |
TiC+Al203 |
Cast Iron |
Turning and milling for ductile cast iron in finish. High
thermal shock resistance. Usable with coolant. |
| SZ200 |
CERAMIC |
Al2O3+ZrO2 |
Cast Iron, Steel |
Medium cutting for cast iron.Toughened by zirconia, high
chemical stability. |
| SZ300 |
CERAMIC |
Al2O3+ZrO3 |
Cast Iron, Steel |
Medium cutting for high hardness cast iron. Harder alternative
to SZ200. |
| SN26 |
CERAMIC |
Si3N4 |
Cast Iron |
Roughing and interrupted cutting for cast iron. Good toughness
and thermal shock resistance. Well balanced wear resistance and
toughness. |
| SN300 |
CERAMIC |
Si3N5 |
Cast Iron |
Roughing and heavy interrupted cutting for cast iron. Tougher
alternative to SN400. Thermal shock resistance and good toughness. |
| SN400 |
CERAMIC |
Si3N6 |
Cast Iron |
General maching for cast iron. Excellent wear reistance in high
speed cutting. |
| SN500 |
CERAMIC |
Si3N7 |
Cast Iron |
Roughing for hard material in high speed. Harder alternative to
SN400. Improeved wear resistance at high cutting speed. |
| SN600 |
CERAMIC |
Si3N8 |
Cast Iron |
Roughing for hard material with interrupted in high speed.
Excellent wear resistance in interrupted cutting. |
| SN800 (SiAlon) |
CERAMIC |
Si3N9 |
High-Temp Alloys, Non-ferrous Materials, Inconel |
General maching for high temperature alloy and inconel (Dry).
Advanced grade with SAlON contained superior edge strength. |
| SN900 (SiAlon) |
CERAMIC |
Si3N10 |
High-Temp Alloys, Non-ferrous Materials, Inconel |
General machining for high temperature alloy and inconel (Wet).
Excellent thermal shock resistance and thermal conductivity. |
| TX510 |
CERMET |
TiCN |
Steel |
Finishing and boring for steel. Excellent wear resistance.
Outstanding surface finish TiCN. Fine finishing and boring for
steel. |
| TX515 |
CERMET |
TiCN |
Steel |
Finishing and boring for carbon and alloy steel. Wear
resistance and high mechanical strength TiCN. |
| TX520 |
CERMET |
TiCN |
Steel |
General machining and bearing for steel. First choice for
machining steel. Turning, grooving, boring and bearing for steel.
Excellent thermal conductivity and wear resistance. |
| TX530 |
CERMET |
TiCN |
Steel |
General application for milling. The toughest cermet grade
TiCN. Wide range of milling for steel materials. |
| TX910 |
CERMET |
TX510+TiN PVD |
Steel |
TiN Coated on TX510 Grade.TiN Coating. Fine finishing and
boring for steel. |
| TX915 |
CERMET |
TX515+TiN PVD |
Steel |
TiN Coated on TX515 Grade. |
| TX920 |
CERMET |
TX520+TiN PVD |
Steel |
TiN Coated on TX520 Grade. First choice for machining steel.
Turning, grooving, boring and bearing for steel. |
| TX930 |
CERMET |
TX530+TiN PVD |
Steel |
TiN Coated on TX530 Grade. Wide range of milling for steel
materials. |
| SBN1000 |
CBN - POLYCRYSTALLINE |
|
Cast Iron, High-Temp Alloys |
Medium and fininshing for cast iron. Ultra high hardness, its
hardness is up to 3.900 Hv. Content of CBN: 95%. Ultra cutting speed for
cast iron roughing to finishing. Machining chilled cast irons and high
chrom alloy steel. |
| SBN2000 |
CBN - POLYCRYSTALLINE |
|
Steel, Hardened Materials |
Continuous cutting for hardened steel. Machinig for continuous
cut of hardened steel. Its hardness is up to 2.700 Hv. Content of CBN:
50%. Precision finishing of hardened steel. Recommended to use for hard
materials, Bearing steel, forged steel and high speed steel. |
| SBN3000 |
CBN - POLYCRYSTALLINE |
|
Steel, Hardened Materials |
Moderately interrupted turning and finishing milling for steel.
Best combination of wear resistance and toughness. Its hardness is up to
2.700 Hv. Content of CBN 60%. General purpose of turning and milling for
hardened steel. |
| SBN4000 |
CBN - POLYCRYSTALLINE |
|
Hardened Materials |
Heavily interrupted cutting of hardened steel. Good resistance
to crater and flank wear. Its hardness is up to 2.900 Hv. Content of CBN
65%. |
| SBN5000 |
CBN - POLYCRYSTALLINE |
|
Cast Iron |
Solid PCBN for cast iron. Extreme wear resistance. Solid CBN.
Content of CBN: 93%. Rough machining of cast iron powder metal
alloy. |
| SPD1000 |
PCD |
|
High-Temp Alloys |
Machining for extemely abrasive materials (plastic composites).
Machining with fine surface finish. Particle size: 4~5µm. Machinig of
aluminum and wood. Gives fine surface finish in turning operation. |
| SPD2000 |
PCD |
|
High-Temp Alloys |
General machining for aluminum alloys and copper. Ultra high
hardness. Great wear resistance. Particle size: 8~9µm. The first choice
of PCD grades, turning operation of aluminum and copper alloy. Machining
aluminum alloy with lower percentage of Si. |
| SPD3000 |
PCD |
|
High-Temp Alloys |
Machining for aluminum alloys(>11%Si) and sintered carbide.
Machining wither interruption. Particle size: 15-22µm. Milling operation
of aluminum alloy. Machining of ultra fine alloy and powder sinterede
metal cutting of composites. |
