DEALS
Clearance
Clearance
Iscar Grade Descriptions
| Grade | Insert Material | Coating | ANSI | ISO | Workpiece Materials | Description / Application |
| IC07 | Carbide | Uncoated | M10-20, S10-30 | High temp resistant alloys | An uncoated, fine grain carbide grade. Used for high temperature alloys and stainless steel at low to medium cutting speeds | |
| IC08 | Carbide | Uncoated | M10-30, N10-25, S10-30 | High temp resistant alloys | An uncoated, fine grain carbide grade. Used for stainless steel and high temperature alloys at low to medium cutting speeds | |
| IC10 | Carbide | Uncoated | C1 | K20-30 | Grey cast iron over 220HBN, Malleable cast iron, silicon aluminum, Copper alloys, FRP, Stone, Wood. High temp reisistant alloys. | Semiroughing. High wear resistance. Low speed. Medium feed. Interrupted cut |
| IC20 | Carbide | Uncoated | C2-C3 | K10-20, N05-25, S05-20, H05-15 | grey cast iron over 220HBN, Malleable cast iron, silicon aluminum, Copper alloys, FRP, Stone, Wood. High temp reisistant alloys. Stainless steel. | An uncoated carbide grade. Used for semi-finishing, finishing and semi-roughing of aluminum, cast iron and stainless steel. Used at low to medium speeds and feeds |
| IC28 | Carbide | Uncoated | C5-C6 | P30-50, M30-40, N10-30, S30-25 | High temp alloys, Austenitic stainless steel, alloy steel, HSS | An uncoated carbide grade. Used mainly for machining aluminum at medium cutting speeds with medium to large chip sections. The inserts usually feature very sharp cutting angles |
| IC50M | Carbide | Uncoated | C6 | P20-30 | Steel, steel casting, Malleable cast iron, Stainless steel. Free-cutting steel. | An uncoated carbide grade. Recommended for semi-finishing to rough steel milling with medium to large chip sections |
| IC54 | Carbide | Uncoated | C5 | P40 | Steel, steel casting with cavities. Austenitic stainless steel. Stainless steel casting. | Suitable for milling, turning and planing at cutting speeds with large feeds; for machining in unfavorable conditions; permits use of sharp positive angles. Workpiece materials: steel, steel castings with cavities, austenitic stainless steel, stainless steel castings |
| IC418 | Carbide - CVD Coated | TiN | C2-C3 | K10-25 | Cast iron; grey, alloyed, soft malleable, hard malleable, soft nodular, hard nodular. | A TiCN/TeC/Al2O3 multilayer, CVD coated grade. Used for grooving and turning grey and nodular cast iron at medium to high cutting speeds. Can be used for interrupted cuts and heavy machining |
| IC428 | Carbide - CVD Coated | TiCN+TiC+AI203 | C3-C4 | P05-15, K05-20, H15-25 | Cast iron; grey, alloyed, soft malleable, hard malleable, soft nodular, hard nodular. | A TiCN/TiC/Al2O3 multilayer, CVD coated grade. Used for grooving and turning grey and nodular cast iron at medium to high cutting speeds |
| IC450 | Carbide - CVD Coated | C5 | P20-40, K20-40 | Grey cast iron, Cast Iron nodular. Stainless steel | High wear resistance. Interrupted cut | |
| IC4028 | Carbide - CVD Coated | TiCN+TiC+AI203 | C2-C3 | K05-20 | Cast iron; grey, alloyed, soft malleable, hard malleable, soft nodular, hard nodular. | A TiCN/TiC/Al2O3 multilayer, CVD coated grade. Used for turning grey and nodular cast iron ast medium to high cutting speeds |
| IC520M | Carbide - CVD Coated | TiCN | C2-C3, C5-C6 | P15-35, M10-20, K10-30 | Steel, Steel casting, Malleable cast iron, HSS. Martensitic stainless steel. | A TiCN CVD coated grade. Used for milling and drilling steel, malleable cast iron and stainless steel at medium feeds and medium to high cutting speeds |
| IC635 | Carbide - CVD Coated | TiN+TiC+Tin | C5 | P30-50 | Carbon steel, Alloy Steel, Stainless Steel | A TiN/TiC/TiN multilayer, CVD coated grade. Used for grooving and turning carbon, alloyed and stainless steel at low speed, high feeds and unfavorable conditions |
| IC656 | Carbide - CVD Coated | TiC/TiN | C5-C6 | P20-40 | Carbon steel, Tool steel, Alloy steel, Steel casting. Malleable cast iron. Austenitic stainless steel, Martensitic stainless steel, Free-cutting steel | A tougher TiC/N-coated carbide of high strength suitabloe for roughing and machining in unfavorable conditions. -- Workpiece materials: carbon steel, tool steel, alloy steel, steel casting, malleable cast iron, austenitic and martensitic stainless steel, free-cutting steel |
| IC8048 | Carbide - CVD Coated | TiCN/TiC/Al2O3 | C6-C7, C2-C3 | P05-30, K05-20 | Steel, Steel casting, Alloy Steel, Stainless steel | A TiCN/TiC/Al2O3 multilayer, CVD coated grade. Used for turning cast iron and steel at medium feeds and high speed machining |
| IC9007 | Carbide - PVD Coated | TiCN/Al2O3/TiN | C6-C7, C2-C3 | P10-20, K10-20 | Cast iron; grey, alloyed, soft malleable, hard malleable, soft nodular, hard nodular, Alloy Steel | A TiCN/Al2O3/TiN multilayer, CVD coated grade. Used for cast iron and steel finishing at high cutting speeds |
| IC9015 | Carbide - PVD Coated | TiCN/Al2O3/TiN | C2-C3, C6-C7 | P10-30, K10-K25 | Carbon and alloy steel, grey cast iron | A TiCN/Al2O3/TiN multilayer, CVD coated grade. Used for finishing and medium machining of carbon and alloy steel and cast iron at high cutting speeds. High wear resistance and excellent repeatability |
| IC9025 | Carbide - CVD Coated | TiCN/Al2O3/TiN | C5-C6 | P20-30, M15-30 | Wide range of steel, stainless steel, Specialty for machining roughed low carbon and low alloy steel. | A TiCN/Al2O3/TiN multilayer, CVD coated grade. Especially recommended for grooving and turning forged, low carbon and low alloyed steel parts. Copes efficiently with machining stainless steel at finishing and medium conditions |
| IC9054 | Carbide - CVD Coated | TiCN/Al2O3/TiN | C5-C6 | P15-40 | Steel, steel casting with cavities. Austenitic stainless steel. Stainless steel casting. | A TiCN/Al2O3/TiN multilayer, CVD coated grade. A tough grade, used for grooving and turning carbon, alloyed and stainless steel at medium to high cutting speeds |
| IC220 | Carbide - PVD Coated | Tin | Steel and cast steel. Stainless steel. Cast Iron. | Finishing. High wear resistance. Low feed. Low plastic deformation | ||
| IC228 | Carbide - PVD Coated | TiN | C5-C6, C1-C2 | P25-50, M30-40, K20-50, S25-30 | Alloy Steel. Aluminum Alloys. Austenitic stainless steel. Carbon steel. Cast Steel. Copper alloys. Exotic Alloys | A TiN PVD coated tough grade. Used for grooving and threading a wide range of workpiece materials at low cutting speeds |
| IC250 | Carbide - PVD Coated | TiN | C5-C6 | P15-35, M20-40 | Steel and cast steel. Stainless steel. | A TiN PVD coated grade. Used for threading and milling steel and stainless steel at medium cutting speeds and high feeds |
| IC308 | Carbide - PVD Coated | PVD | C6-C7 | P15-30, M20-30, K20-30 | Heat resistance alloys, hard alloys. Carbon steels. | Heat resistant alloys, hard alloys, carbon steels. Parting and grooving on alloy steel, stainless steel, hard materials and high-temp alloys |
| IC328 | Carbide - PVD Coated | TiN/TiCN | C5-C6, C2-C3 | P25-50, M30-40, S25-30 | Alloy Steel. Aluminum Alloys. Austenitic stainless steel. Carbon steel. Cast Steel. Copper alloys. Exotic Alloys | A TiN/TiCN PVD coated tough grade. Used for milling, grooving, parting and drilling a wide range of workpiece materials, at low to medium cutting speeds |
| IC350 | Carbide - PVD Coated | TiN/TiCN | C5-C6 | P15-35, K15-40 | Steel, Steel Casting. Malleable cast iron. Stainless steel, Free-cutting steel | A TiN/TiCN PVD coated grde. Used for general drilling applications |
| IC354 | Carbide - PVD Coated | TiN/TiCN | C5-C6 | P20-40, M10-30 | Steel, steel casting with cavities. Austenitic stainless steel. Stainless steel casting. | A TiN/TiCN PVD coated, tough grade. Used for general applications in parting and grooving carbon, alloy and stainless steel at medium to high cutting speeds |
| IC3028 | Carbide - PVD Coated | TiN/TiCN | C5-C6, C2-C3 | P25-45, M15-35, S20-30 | Steel, steel casting with cavities. Austenitic stainless steel. Stainless steel casting. High temp alloys | A TiN/TiCN PVD toughest coated grade. Used for turning stainless steel and high temperature alloys, at low to medium cutting speeds. Used for interrupted cuts and very heavy turning operations |
| IC507 | Carbide - PVD Coated | TiN/TiCN/TiN | C6-C7 | P10-30, M05-20, S05-20, H05-15 | High temp alloys, Austenitic stainless steel, Hard alloys. Hardened steel | A tough submicron substrate, TiN/TiCN/TiN PVD coated grade. Suitable for low to medium cutting speeds. Used for turning heat resistant alloys, austenitic stainless steel and hard steel |
| IC508 | Carbide - PVD Coated | PVD | C5-C7 C2-C3 | P20-40, M20-30, K20-30 | High temp alloys, Hard alloys. Carbon steel | High temp alloys, hard alloys, carbon steel. Low to medium speed. Very high toughness for interrupted cut. |
| IC520 | Carbide - PVD Coated | TiN/TiCN/TiN | M05-15, N05-15 | Stainless Steel | A TiN/TiCN/TiN PVD coated grade. Suitable for turning austenitic stainless steel and soft materials | |
| IC528 | Carbide - PVD Coated | TiN/TiCN/TiN | C5-C6 | P25-45 | A tough submicron substrate, TiN/TiCN/TiN PVD coated. Used for grooving and drilling a wide range of workpiece materials, at low to medium cutting speeds | |
| IC520N | Cermet - PVD Coated | TiCN/TiN | C6-C7 | P05-25, M05-15 | Steel. Steel Casting. Malleable cast iron. Stainless Steel. Free-cutting Steel | A cermet TiCN/TiN PVD coated grade. Used for grooving and turning applications. Recommended for semi-finishing and finishing operations when excellent surface finish is required. Wear resistant, prevents built-up edge |
| IC530N | Cermet - PVD Coated | TiCN/TiN | C6-C7 | P10-30, M10-20 | Carbon steel. Tool Steel. Alloy Steel. Steel casting. Malleable cast iron. Austenitic stainless steel. Martensitic stainless steel. Free Cutting Steel | A cermet TiCN/TiN PVD coated grade. Provides excellent resistance to wear and plastic deformation even at high cutting speeds and medium feeds. Useful for turning semi-finishing and finishing applications |
| IC570 | Carbide - PVD Coated | TiN/TiCN/TiN | C6-C7 | P10-25, M05-25 | Steel. Steel Casting. Malleable cast iron. HSS. Martensitic Stainless Steel | A TiN/TiCN/TiN PVD coated grade. Used for grooving and turning alloyed and stainless steel for semi-finishing and finishing applications at medium cutting speeds |
| IC907 | Carbide - PVD Coated | TiAIN | C7-C8 | P10-30, M05-20, S05-20 | High temp alloys. Austenitic stainless steel. Hard alloys. Hardened steel. | A tough submicron substrate, TiAlN PVD coated grade. Suitable for turning heat resistant alloys, austenitic stainless steel and hard steel at low to medium cutting speeds |
| IC908 | Carbide - PVD Coated | AlTiCrN | C6-C7, C1-C2 | P15-30, M20-30, K20-40, N15-25, S15-25, H30-40 | High temp alloys. Austenitic stainless steel. Hard alloys. Carbon steel. | A hard, fine grain substrate with excellent chipping resistance, combined with a new AlTiCrN PVD coating. Provides high wear and oxidation resistance in parting, grooving and threading applications. Recommended for a very wide range of materials and machining conditions |
| IC928 | Carbide - PVD Coated | TiAlN | C5-C6, C1-C2 | P20-50, M20-40, K15-40, S15-40 | Alloy Steel. Aluminum Alloys. Austenitic stainless steel. Carbon steel. Cast Steel. Copper alloys. Exotic Alloys | A PVD TiAlN coated tough grade. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations |
| IC20N | CERMET | C6-C8 | P05-20, M05-15 | Carbon steel. Alloy Steel. Exotic Alloys. Cast steel. Gray cast iron. | A cermet grade, used for grooving and turning applications. Recommended for semi-finishing and finishing operations when excellent surface finish is required. Wear resistant, prevents built-up edge | |
| IC30N | CERMET | C6-C7 | P10-30, M10-20, H10-25 | Carbon steel. Tool Steel. Alloy Steel. Steel casting. Malleable cast iron. Austenitic stainless steel. Martensitic stainless steel. Free Cutting Steel | A cermet grade. Provides excellent resistance to wear and plastic deformation even at high cutting speeds and medium feeds. Useful for turing and milling of semi-finishing and finishing applications | |
| IB50 | CBN - POLYCRYSTALLINE | C3-C4 | K01-10 H01-10 | Hardened steel over 50HRc. | A 50% CBN brazed tip, used for finishing hardened steel (45-65 HRc) in continuous cutting | |
| IB65 | CBN - POLYCRYSTALLINE | C8 | P01-P10 | Cast iron alloyed. Cast iron grey. Cast iron grey over 220HBN. Cast iron nodular. Hardened steel over 50HRc. | Semifinishing | |
| IB80 | CBN - POLYCRYSTALLINE | C4-C3 | K01-K15 | Cast iron alloyed. Cast iron grey. Cast iron grey over 220HBN. Cast iron nodular. Hardened steel over 50HRc. | Medium to roughing, high cutting speed. Interrupted cut of hardened steel. | |
| IB90 | CBN - POLYCRYSTALLINE | C4-C3 | K01-K10 | Cast iron alloyed. Cast iron grey. Cast iron grey over 220HBN. Cast iron nodular. Hardened steel over 50HRc. Cast iron Hardened steel HSS rolls. | Medium to roughing, high cutting speed. Interrupted cut of hardened steel. | |
| IB90A | CBN - POLYCRYSTALLINE | C3-C2 | K01-K10 | Cast Iron alloyed. Hardened Steel. HSS rolls. | Medium to roughing of hardened steel. High speed Machining of Cast Iron. | |
| ID4 | PCD | C4-C3 | K01-K10 | Pure Aluminum Alloys, Wood, FRP | General Machining, High Speed | |
| ID5 | PCD | C4-C3 | K01-K10 | Aluminum alloys (si>12%) Cemented Carbide, non-terrous materials | High speed finishing to Medium Machining | |
| ID6 | PCD | C4-C3 | K01-K10 | Aluminum alloys (si>12%) Cemented Carbide | High speed finishing to Medium Machining | |
| IN11 | CERAMIC - ALUMINA/TiC | C3-C4 | K01-10, S01-10 | Cast Iron, Nickel-base alloys, Titanium-base alloys. | White ceramic, features high toughness and wear resistance, used for high speed turning of cast iron | |
| IN22 | CERAMIC - ALUMINA/TiC | C3-C4 | K05-10, H05-25 | Hardened steel | Black ceramic (Al2O3/TiCN), used for light roughing and finishing for high speed machining of steel, tool steel, hardened steel, chilled cast iron, high chromium steel | |
| IN23 | CERAMIC - ALUMINA/TiC | C3-C4 | K05-15, H10-30 | Cast Iron, Hardened Steel | Black ceramic (Al2O3/TiCN), used for machining grey and nodular cast iron at medium to finishing conditions | |
| IS8 | CERAMIC - SILICON NITRADE | C2-C4 | K01-20 | Cast Iron, Nickel-base alloys | A silicon nitride grade, used for medium turning and milling applications. Can be used for interrupted cuts. Cutting speed range: 100-1500 m/min, feed range: 0.1-1.0 mm/rev | |
| IS80 | CERAMIC - SILICON NITRADE | C2-C4 | K01-20 | Cast Iron, Nickel-base alloys. Titanium base alloys. | A CVD coated Si3N4 ceramic grade. Used for rough turning and milling of grey and nodular cast iron. |